August 31, 2016 inncrotech

UPS

UPS

Line Interactive UPS

The Line Interactive UPS/Inverter is a totally different than any kind of UPS/Inverters in market now. It has a separate battery charger, inverter and source selection switch and that is replaced by a combination of UPS / Inverter which both charges the battery and converts its energy to AC for the output as per requirement. When the line power is operating, the UPS/Inverter charges the battery & Vice-Versa.
The main advantage of this design is that the inverter/converter unit is always connected to the output, powering the equipment. This design allows for faster response to a power failure than a standby UPS. The inverter/converter is also normally fitted with circuitry to filter out noise and spikes, and to regulate the power output, providing additional power during brownouts and curtailing output during surges.
The line-interactive UPS is commonly used in units for home and business applications & it is available up to 3,000 VA or more than this as per Customer Requirements.

Elegance Power Saver UPS

Transformers

PCB

industrial trans

Industrial Transformers

Our organization has attained specialization in manufacturing and supplying an extensive range of Industrial Transformers. These transformers are designed and developed using optimum quality raw material & components that are sourced from the trusted vendors of the market. We offer these Transformers to the customers as per their demands at market leading prices. Our offered Transformers are Isolation Transformers, Control Transformers, UPS Transformers and others that are mentioned below:

Isolation Transformers

Our organization has attained specialization in manufacturing and supplying an extensive range of Isolation Transformers. These transformers are designed and developed using optimum quality raw material & components that are sourced from the trusted vendors of the market.

UPS And Inverter Transformers

Our organization has attained specialization in manufacturing and supplying an extensive range of UPS And Inverter Transformers.

high freq trans

High Frequency Transformers

A power supply is an essential part of all electronic devices. A switching mode power supply is a light weight power solution for most modern electronic equipment. The High Frequency Transformers is the backbone of modern switched mode power supplies.

Peciliarities of these transformers are,

1. High transmission efficiency, 2. Minimum power loss, 3. Stable performance, 4. Small rise in temperature.,5. Less magnetism leaks.,6. Small volume., 7. The magnetic material used for the high-frequency transformer in our company is selected from the highest grade of high-frequency soft.

Constant Voltage Transformers

Continuous stable supply of A.C. Power is the life line of any sophisticated electronic system. Performance of any electrical equipment/instrument is optimum at its rated voltage; Under-voltage & Over-voltage produce harmful effect. Under-voltage generally reduces efficiency, whereas Over-Voltage shortens the life. Power SPIKES, accidental OR from the Electricity Boards, can waste very valuable time and corrupt the valuable data fed in. Also a very low voltage can force the system to shut down. C.V.T. is the only remedy to overcome hazardous consequences of BROWN-OUTS, SAGS, SURGES, and SPIKES and in general all EMI / RFI NOISES. C.V.T. IS A STATIC VOLTAGE STABILIZER with no moving parts gives very accurate output voltage of +/- 2% of rated output voltage over a wide input voltage range of 175V to 265V, 50Hz. super fast Correction within 1/50th of second.

inverter trans

Inverter Chokes

Our organization has attained specialization in manufacturing and supplying an extensive range of Inverter Chokes. The biggest features of choke lies in its ability to sustain long working hours, least maintenance requirements and compactness. It is manufactured using quality material & advanced technology.

AC And DC Chokes

We specialize in catering meticulously designed and tested high precision array of AC And DC chokes that can deliver outstanding performance to dedicated industry application.

Control Transformers

control trans (2)

Control Transformers are dry type natural air cooled isolation (separation) transformers, where the primary (line) side and the secondary (load) side winding are electrically separated from each other. Thus, there is a functional isolation by design. These products are helpful in saving power and can protect the electrical equipments from breakdown. Our products are of competent price and are available in various capacities.

Auto Transformers

auto9

An Auto Transformers is usually lighter and less expensive than isolation type transformers. The Auto Transformer is a full sine wave transformer that can be used 24/7 with any type of AC (alternating current) appliance. This single coil has one or more extra taps or electrical connections in various positions along the winding. Each tap corresponds to a different voltage so that effectively a portion of the same inductor acts as part of both the primary and secondary winding. Depending on the application, that portion of the winding used solely in the higher-voltage (lower current) portion may be wound with wire of a smaller gauge, though the entire winding is directly connected.

Rectifier Transformers

With the help of our experienced engineers, we are able to design and develop Rectifier Transformers. We make use of the finest quality raw material, latest machinery and techniques in designing and developing these Rectifier Transformers. After testing on several parameters, we assure that these transformers are flawless and in compliance with the set industry norms & standards.

Salient Features:

• Available in various models.

• There are options for free, forced or fan cooling.

• Regulated configurations with tight voltage control

• Unregulated configurations for simplicity and reliability.

• Features clean input power with low harmonic distortion.

• They have minimum output current ranging from 50 A to 400 A

• Transformer rectifiers are highly efficient and requires minimum maintenance.

Welding Transformers

welding

The Welding Transformers is a step down transformer that reduces the voltage from the source voltage to a lower voltage that is suitable for welding. The secondary may have several taps for adjusting the secondary voltage to control the welding current. The taps are typically connected to a several high- current plug receptacles or to a high- current switch.

Isolation Transformers

S.S. ENTERPRISES has a wide range of Isolation Transformers which reduces the effects of power line problems like noise, spikes, surges, and transients. This can be eliminated to a greater extent to a minimum.

Ultra Isolation Transformers

Ordinary Isolation Transformers isolate one circuit from another, while magnetically coupling wanted energy from one to other. Such a transformer is adequate for use with low gain circuits or insensitive instruments. However, if the transformers must work into a high gain load or sensitive instrumentation, noise potentials between the primary circuit and ground must be prevented from affecting the secondary circuits due to capacitive and resistive coupling between the transformers windings. (refer PDF)

UPS Transformers

ups trans

Features of Transformer for UPS:

There are air flows between coils’s layer to layer and between coils to core, thus heat escapes quickly, and temperature rises lower.
Small volume, light weight and good workmanship.
After vacuum pressure impregnating, the whole transformer is moisture proof and mildew proof.
Insulation class F or H.
Lower audio-noise.

Inverter Transformers

inverter

We are one of the leading manufacturer and supplier of superior quality Inverter Transformers. These inverter transformers are good demand in the market due to high quality and durability. These products are available in market at competitive rates.

Panel Mounted Control Transformer

control trans (2)

PCB Mounted Control Transformer

control trans (2)

PCB Mounted Stud Type Control Transformer

control trans (2)

Pin Type Control Transformer

control trans (2)

Transformer with Protection

control trans (2)

Choke (PCB Mounted)

control trans (2)

Iron Powder Choke (Big Size)

control trans (2)

Iron Powder Choke (Small Size)

control trans (2)

Pulse Transformer

control trans (2)

Inductor

control trans (2)

Inductor

control trans (2)

Choke (PCB Mounted)

control trans (2)

Choke (PCB Mounted)

control trans (2)

High Frequency Transformer

control trans (2)

High Frequency Transformer

control trans (2)

High Frequency Transformer.

control trans (2)

High Frequency Transformer.

control trans (2)